编号 |
中文名称 |
英文名称 |
BS EN 752-1-1996 |
室外建筑物的排水和污水系统.概述和定义 |
Drain and sewer systems outside buildings - Generalities and definitions |
BS 6297-1983 |
小型污水处理工程和污水池设计及安装实用规程 |
Code of practice for design and installation of small sewage treatment works and cesspools |
BS EN 598-1995 |
污水工程用球墨铸铁管、接头、配件及其连接件.要求和试验方法 |
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
BS EN 295-6-1996 |
排水管和污水管用陶制管、管件及管接头.陶制管人孔的要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes |
BS EN 295-7-1996 |
排水管和污水管用陶制管、管件及管接头.陶制管和管插接接头的要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking |
BS EN 681-1-1996 |
弹性密封件.水和污水排放设施用管联接密封件的材料要求.硫化橡胶 |
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Vulcanized rubber |
BS EN 1054-1996 |
塑料管道系统.建筑物内粪水和污水排放下水道用热塑管道系统.连接件的气密性试验方法 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
BS EN 1306-1996 |
内河航运船只.污水排放用连接件 |
Inland navigation vessels - Connections for the discharge of waste water |
BS EN 752-3-1997 |
室外建筑物的排水和污水系统.计划 |
Drain and sewer systems outside buildings - Planning |
BS EN 752-2-1997 |
室外建筑物的排水和污水系统.性能要求 |
Drain and sewer systems outside buildings - Performance requirements |
BS EN 1671-1997 |
建筑物外压力污水系统 |
Pressure sewerage systems outside buildings |
BS EN ISO 5667-13-1998 |
水质.采样.第13部分:生活污水和水处理厂的污泥采样指南 |
Water quality - Sampling - Guidance on sampling of sludges from sewage and water treatment works |
BS EN 752-5-1998 |
建筑物外的排水和污水系统.修复 |
Drain and sewer systems outside buildings - Rehabilitation |
BS EN 752-6-1998 |
室外建筑物的排水和污水系统.泵抽排装置 |
Drain and sewer systems outside buildings - Pumping installations |
BS EN 12889-2000 |
排水管和污水管的非挖沟施工和试验 |
Trenchless construction and testing of drains and sewers |
BS EN 752-4-1998 |
建筑物外的排水和污水系统.水工设计和环境考虑 |
Drain and sewer systems outside buildings - Hydraulic design and environmental considerations |
BS EN 1401-1-1998 |
不承压地下雨水管和污水管用塑料管道系统.未增塑聚氯乙烯(PVC-U).管道、配件和系统规范 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Specifications for pipes, fittings and the system |
BS EN 752-7-1998 |
室外建筑物的排水和污水系统.维修和使用 |
Drain and sewer systems outside buildings - Maintenance and operations |
BS EN 1123-1-1999 |
污水系统用插接管的纵向焊接热浸镀锌钢管及配件.要求、试验和质量控制 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control |
BS EN 1124-1-1999 |
污水系统用带套管和孔座的纵向焊接不锈钢管和配件.要求、测试和质量控制 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
BS EN 1124-3-1999 |
污水系统用带套管和孔座的纵向焊接不锈钢管和配件.系统X、尺寸 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System X; dimensions |
BS EN 1293-1999 |
气压排气管、排水管和污水道中使用部件的一般要求 |
General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
BS EN 773-1999 |
液压压力排气管、排水管和污水管道中使用部件的一般要求 |
General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
BS EN 1123-2-1999 |
污水系统用带套管和孔座的纵向焊接的热浸镀锌钢管和配件.尺寸 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions |
BS EN 12255-11-2001 |
污水处理厂.要求的一般数据 |
Wastewater treatment plants - General data required |
BS EN 1989-2000 |
热塑管道系统.地下埋装的非承压污水设施用连接件.通过对密封压力的估计对带热塑弹力密封件的连接件的长期密 |
Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
BS EN 12255-3-2000 |
污水处理厂.预处理 |
Wastewater treatment plants - Preliminary treatment |
BS EN 12255-1-2002 |
污水处理工厂.一般建造原则 |
Wastewater treatment plants - General construction principles |
BS EN 13566-3-2003 |
地下无压排水管网和污水管网翻新用塑料管道系统.紧密配合管加衬 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with close fit pipes |
BS EN 12255-4-2002 |
污水处理厂.初次澄清 |
Wastewater treatment plants - Primary settlement |
BS EN 13566-1-2003 |
地下无压排水管网和污水管网翻新用塑料管道系统.总则 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - General |
BS EN 13566-4-2003 |
地下无压排水管网和污水管网翻新用塑料管道系统.现场加工管衬里 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with cured-in-place pipes |
BS DD ENV 1852-2-2001 |
非承压地下排放和污水用塑料管道系统.聚丙烯(PP).符合性评定指南 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for the assessment of conformity |
BS EN 12255-9-2002 |
污水处理厂.气味控制和通风 |
Wastewater treatment plants - Odour control and ventilation |
BS EN 12255-6-2002 |
污水处理厂.活性污泥处理法 |
Wastewater treatment plants - Activated sludge processes |
BS EN 12255-7-2002 |
污水处理厂.生物固定薄膜反应器 |
Wastewater treatment plants - Biological fixed-film reactors |
BS DD ENV 1401-2-2001 |
非承压地下排放和污水用塑料管道系统.未增塑的聚氯乙烯(PVC-U).符合性评定指南 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for assessment of conformity |
BS DD ENV 13801-2001 |
建筑物内污物污水排放(低温和高温)用塑料管道系统.热塑管.推荐的安装实施规程 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation |
BS DD ENV 1566-2-2001 |
建筑物内污物污水排放(高、低温)用塑料管道系统.氯化聚氯乙烯(PVC-C).符合性评定指南 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Guidance for the assessment of conformity |
BS DD ENV 1455-2-2001 |
建筑物内污物污水排放(高、低温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物(ABS).符合性评定指南 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene- styrene (ABS) - Guidance for the assessment of conformity |
BS DD ENV 1519-2-2001 |
建筑物内污物污水排放(高、低温)用塑料管道系统.聚乙烯(PE).符合性评定指南 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Guidance for the assessment of conformity |
BS DD ENV 1329-2-2001 |
建筑内污物污水排放(高、低温)用塑料管道系统.未增塑的聚氯乙烯(PVC-U).符合性评定指南 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity |
BS DD ENV 1401-3-2001 |
非承压地下排放和污水用塑料管道系统.未增塑的聚氯乙烯(PVC-U).安装指南 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for installation |
BS DD ENV 1451-2-2001 |
建筑物内污物和污水排放(高、低温)用塑料管道系统.聚丙烯(PP).符合性评定指南 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Guidance for the assessment of conformity |
BS ISO 9631-2004 |
橡胶密封件.温度为110℃及以下的热水供给、排水和污水管道用连接环.材料规范 |
Rubber seals - Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110 °C - Specifications for the material |
BS EN ISO 15083-2003 |
小艇.舱底污水抽吸系统 |
Small craft - Bilge-pumping systems |
BS EN 13508-1-2003 |
建筑物外部排水和污水道系统的条件.一般要求 |
Condition of drain and sewer systems outside buildings - General requirements |
BS EN 13244-2-2003 |
一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.管道 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Pipes |
BS EN 13244-1-2003 |
一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.总则 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - General |
BS EN 12255-15-2003 |
污水处理厂.活性污泥处理厂曝气池清水中充氧量的测量 |
Wastewater treatment plants - Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants |
BS EN 13244-5-2003 |
一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.系统目的的适合性 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fitness for purpose of the system |
BS EN 13244-4-2003 |
一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.阀门 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves |
BS EN 13244-3-2003 |
一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.配件 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fittings |
BS DD CEN/TS 13244-7-2004 |
排水和污水处理通用地下和地上压力设备用塑料管道系统.聚乙烯(PE).符合性评定指南 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity |
BS EN ISO 15749-4-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.卫生排水和污水处理管 |
Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, sewage disposal pipes |
BS EN 1123-3-2004 |
污水系统用带插接套的纵向焊接热浸镀锌钢管及配件.真空排水系统以及造船用排水系统的尺寸和特殊要求 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
BS EN 295-10-2005 |
排水和污水管道用陶土管、配件及管连接件.性能要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Performance requirements |
BS EN 13508-2-2003 |
建筑物外部排水和污水道系统的条件.目视检验编码系统 |
Conditions of drain and sewer systems outside buildings - Visual inspection coding system |
BS DD CEN/TS 12666-2-2006 |
非承压地下排放和污水用塑料管道系统.聚乙烯(PE).符合性评定指南 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity |
BS 3495-1972 |
铝垃圾箱规范 |
Specification for aluminium refuse storage containers |
BS 792-1973 |
低碳钢垃圾箱规范 |
Specification for mild steel dustbins |
BS 1136-1972 |
低碳钢垃圾箱规范 |
Specification for mild steel refuse storage containers |
BS 6642-1985 |
一次使用的聚乙烯塑料垃圾袋规范 |
Specification for disposable plastics refuse sacks made from polyethylene |
BS EN 1501-1-1998 |
垃圾收集车及其相关提升装置.一般要求和安全性要求.后部装载的垃圾收集车 |
Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Rear-end loaded refuse collection vehicles |
BS 1703-2005 |
垃圾道和垃圾斗规范 |
Refuse chutes and hoppers - Specification |
编号 |
中文名称 |
英文名称 |